1 / 9
Lazy Grid Clock v2 — zdjęcie 1
1 / 9

Lazy Grid Clock v2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Follow up to v1, which is now no longer available. 7x11 LED grid using a single piece of LED strip.

Ocena
5 / 5
Polubienia
127
Pobrania
211
Wydruki
5
Wyświetlenia
4192
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Update to my Lazy Grid Clock: https://www.thingiverse.com/thing:3241802 (v1 removed from thingiverse.

Note: Just uploaded/imported this to prusa printers to try and get a feel for the editing capabilities here... so layout/images/whatever might change. And if I saw that correctly .INO files don't get imported, so you'll need to have a look at the instructables/thingiverse pages from this one to get everything.

Basically the same as before. But I've decided to remove some options (variable diffusers and such) and concentrate on making printing and building this easier.

The LED grid itself is the same, so are the electronics. So sketches running on LGCv1 should work out of the box on v2, there's some remixes out there.

 

Complete Documentation:
https://www.instructables.com/id/Lazy-Grid-Clock-V2/

 

Print instructions

Walls are always multiples of 0.5mm, so I strongly suggest using and extrusion width/line width of 0.5mm (no, not recommending a 0.5mm nozzle here!).

Tagi