170 modeli
Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Prusament PLA PLA…
A 3D printable Dhaka Line BRTA bus CAD model is a highly detailed computer-aided design (CAD) model of the popular public transportation buses used in Dhaka, Bangladesh. The CAD model is designed to be 3D printed, allowing users to create…
I noticed that many of the current Raspberry Pi 4 fan cases placed the fan directly over the CPU. While that is nice in theory, it prevented having an RTC. This design tries to keep a low(ish) profile while allowing for a heatsink and…
(⌐■_■) if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an RTC installed and the UPS-Lite you want this case! i included STP and STL-Files let me know what you think!…
This is an updated 4 Badge / Smart Card / CaC holder that also holds 2 RSA Tokens. New bonus of a recessed lanyard holder at the top! Also no extra plastic in the last slot at the bottom. Original remix I did here:…
NEM bus for Marklin 3054 shortcoupler
EN: This is a print-in-place swivelling and rotating wall bracket compatible with the Xiaomi Aqara RTCGQ11LM motion sensor. The Xiaomi PIR attaches directly to the rotating base of this wall bracket, replacing the original battery cover.…
Arduino DS3231 ZS042 AT24C32 IIC Module Precision RTC Real time Clock Memory mount. V4 has 2.75mm holes and V5 has 2mm holes Category: 3D Printing
Background When I first built my Prusa i3 MK3S+ and already having a standard Slice Engineering Mosquito hotend , I opted to immediately upgrade the stock extruder / hotend assembly to utilize Bondtech's BMG Prusa upgrade kit (specific to…
To be fair, this fan shroud barely improves the partcooling. On some prints there was a slight improvement, on other prints it was exactly the same result. I think with a more powerful partcooling fan like the GDSTime 12000 RPM Fan it…
Mount for the helialux Spectrum and Smartcontroler 4 screws were used for mounting it to the wall size: 3,5 x 19 mm
Three different ways to get through the walls you built out of Axel's Snap Walls - a closed door, a barred portcullis, and a simple open arch. I tried to optimize for .2mm print height, but the details are so tiny that they will benefit…
Designed and Printed for a co-worker who needed to hold chrome books for his children. It is made to fit almost* any laptop from a thin MacBook-Air to a Chromebook with a hard-shell case on it. This is a large print, please be sure to…
I used (12x) M5 x 25mm Flat Head screws and nuts for the main mounts and (2x) M5 X 20mm Flat Head screws and nuts for the strike
This is a 4 Badge / Smart Card / CaC holder that also holds 2 RSA Tokens. Perfect for IT admins with many badges and tokens they need to frequently remove or reference. Original Design: https://www.thingiverse.com/thing:4247164 by…
This STL was supplied to me by Bondtech since it is not available on the site, and the Bondtech SHORTCUT mosquitoExtruder/hotend Accessory Pack has not been available in the US for some reason. Also, the fan shroud is not sold separately…
If you own a Retroleum SmartCard V2 or V3.1 from Phil ( http://blog.retroleum.co.uk/smart-card-for-zx-spectrum/ ) you may look for a nice case. There is one case available from Johan at https://github.com/SM7I/SmartCardv2 , but it doesn't…
Also available with english shortcuts for every day! The box has a small clip so it won't open on it's own. It even does a click sound when you close it. The tolerance is not very high so a slighty squashed first layer has to be cut…
Upload of freely available files created by 3daeroventures. As 3daeroventures.com made all files available for free and later disappeared republishing files and instructions here so that everyone could access them.
OpenPill Mini casees modified to accommodate smartcard hat. There are a number of different models and what you need will be dependent on both the cardslot(s) that your reader hat has as well as how you have connected it, Stacking Header…
The Real Time Clock module increases the clocks time accuracy. No need for tuning of the clock speed as described in the original model. The price for a DC3231 RTC model is usually less than 12€ for 3 pieces. The housing is made for an…
Strawberry-shortcake The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
Found the design and modified it for my use. I added a small socket to print it upright. With my parameters, the dartcup fits immediately i a 10mm aluminium tube. All you need is a steel needle. Got mine from ASMC, but they don't have…
This is a case to hold your Raspberry Pi Pico with attached Precision RTC Module and Pico Display Pack modules. This was designed to house the Pico Solar System build: https://github.com/dr-mod/pico-solar-system Print Settings Printer…
Gita/Sportcross Boot Shroud Clip and Pin. Originals are out of stock and discontinued so I made one, Its functionally the same as the Toyota part and the clip and pin work with original parts. Toyota/Lexus pt no 64933-53010-A0/C0 I've…
Print Settings: PLA 0.2 0.4 Nozzle no supports
The Emeet Smartcam C950 doesn't come with threads for a mount so I made this so it can be attached to mounts. I currently have it on the below mount. Mount…
I have seen several of these but none of the makers will post files or build list, so I made my own. This is a light pod for a SmartCap that contains brake, reverse and chase lights. There is an optional middle section that will hold a…
Nr. 1: Infill 100% Nr. 2: keine Boden/Deckschichten 3 Perimeter Infill: Bienenwabe 30% (Honeycomb) Nr. 3: keine Boden/Deckschichten 3 Perimeter Infill: Stütz kubisch 50% (Support Cubic) Nr. 4: keine Boden/Deckschichten 3 Perimeter Infill:…
Remix of Wuggi's excellent EQ5/HEQ5 tripod leg transport clip to print it without supports. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable Infill: 10 Filament: C-Tech PETG Notes:…
If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way. So I got replacement then modeled it the best I could to match to the original toyota…
Lenovo Yoga Slim 7i 14ITL05 Stand This 3D model is designed specifically for the Lenovo Yoga Slim 7i 14ITL05 laptop with fabric coated lid, featuring a precise cutout to alagn the laptop by center. . Additionally, it is compatible with…
One of the clips on my boot shroud was broken so I have made a version to replace it. I made 2 types, Solid and one with a TPU insert to better match the original style. I've not tried the TPU version so I have no idea if it'll work or…
Cases for SeedSigner with Smartcard Hat.
The original lid is about 1.5mm too deep (front to back), so I've cut that much out of the middle of it and merged the resulting parts. It now fits perfectly.
Remix of wonderful wallmount charger for iPad Mini 4 generation with SmartCover - https://www.thingiverse.com/thing:1139725 . I just added slot for an Apple Pencil. Feed the cable through and mount the cap with 2xM3 screws. Finally, mount…
This Tradfri Shortcut-Button wall mount is designed to be placed on any wall in your home. A magnet is used to hold the button. Double-sided tape is used to mount it to a wall. The cut out in the center of the back is for the magnet. The…
I wanted to have two shortcut buttons underneath my desk, to turn on and off both a light and a fan. I then got a bit distracted… This is a snap together enclosure for a couple of Cherry MX style switches and a D1 mini style…
Lose your Mage Knight Castle Gate Portcullis. Print this replacement out, paint and you're good to go.
Shifterknob in Team heartcore design. Two version available, M10 or ½ Inch. Just print it with the thread down and use a brim. 5 Walls, 20% Infill. No need to go low with layerhight. If you want to paint it, I recommend to Print it in…
I remixed this Partcooler Fan Mod because it often broke at my Printer. I made it a bit thicker and gave it some rounds. You also can see my Neopixel Light Mod in the pictures. This is the Neopixel Ring i used:…
This is a mod of the reindeer fanshroud to enable use of volcano length hotends like the K1 ceramic heater hotend. It could also work with other, not as long but longer than stock hotends, I haven't tested that though. I modded the…
A simple dust cover for the Braun Series 9 SmartCare Cleaning Station. Easy print without any support.
Looking for a better way to display your Ulanzi TC001 Smart Pixel Clock? This 3D-printable, clipsable support is the perfect solution. Designed for ease of printing and assembly, it provides a stable and secure platform for your clock.…
The Real Time Clock (RTC) board in the sBitx v3 is mounted by a header and just hangs there without support; It's also rubbing up against a Toriod :-( This Standoff adds support to keep the RTC from moving around. I'm running a Fan off…
Make your own design for Ikea shortcut button cover. This is just the base for your designs.
Aftermarket Gameboy cartridge connector.
Wallmount for Laxihub P2-TY indoor smartcamera. The standard camera of the A1 is so bad that i was using this simple
I used 20mm M4 bolts which I happen to have laying around. Print solid. Brim. No supports. Print instructions Category: R/C Vehicles
I installed the Bondtech LGX Shortcut Mosquito hotend on my Prusa Mk3S and it worked well. That is until I put in in an enclosure, then the limits of the Shortcut's very short heatbreak became evident by the fact that i was getting jams…
I used an NMB-MAT Model: BG0903B057-P0s but as this fan was salvaged from old electronics you will maybe need to search a little bit. Fan dimensions are ~33x58mm
molle to design your own accessories
Small adapter to mount a Ikea TRÅDFRI Shortcut-Button to JUNG AS500 frame (Rahmen 3-fach Jung AS500 583 WW alpinweiß). I use a 6mm magnet to hold the button in place and 4 screws (M3 6mm) to fix the adapter into the Jung AS500 frame. Have…
For attaching use double side tape.
Adapts seatpost mount that comes with Garmin Varia RTC71 Camera/radar to be used with Trek/Bontrager Blendr saddle mount. Uses the hardware from the original mount. Has a slot to tether to saddle rails and a hole for an m3 (preferably…
Print in TPU only. Useful if your OEM plastic connector has broken. *v2 added - fixed the push tab to print better, straightened the connector so it doesn't bunch up one way, and thinned it slightly to better rotate on the cap.
This mount works with Blendr capable saddles. It allows you to mount the Garmin Varia RTC 710 to the compatible Blendr mount using the parts that come with the Garmin Varia. This will not work with other version of the Varia that use the…
This may be used as a replacement for the Vanmoof S2s Smart-Cartridge housing in case yours is broken or split apart. Or it might be used with your own DIY controller for the bike, now that VM is no longer. I've omitted the internal…
This is a quick (but very functional) draft of an adapter to replace the 5015 radial print cooling fan used on the Bondtech Shortcut Toolhead for Prusa MK3s with a 40mm axial one. This allows one to use a wide variety of 40mm axial fans,…
I am very happy with an app "HotKeyBind" which allows me to individually program function keys with my favourite actions. Here some examples: Shift+F1 adds a date to a filename. I store “2023-02-12 (1) ” in key F1, so a file is renamed to…
It's not easy to securely mount the IKEA Tradfri Shortcut Button to a wall. You can use the provided metal plate, but the magnet isn't strong enough and the button gets easily knocked down. You could attach it with double-sided tape, but…
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary Building on the grateing release , now we have doors. For instructions on how to…
You will need for Fan: 2 pcs. M4x16 screw 2 pcs. M4 nut 4 pcs. M4 washer You will need for SSD/HDD: 4 pcs. M3x16 screw (Allen key) SATA plug: L70.6mm x W18mm x H12mm You will need for RTC (DS3231): 3 pcs. M2x10 or M2x12 3 pcs. M2 nut 1…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Ferrari / SportCAR scale it up/down as your needs easy to print
I've got several of these Kwikset smart door locks around my house for a number of years. They generally work pretty well but the summer months can play havoc with them. During summer the 70%+ humidity swells doors, frames etc and can…
Transportcase- Kekz Audiochips
I decided to make some miniprints models for fun.
Case includes precise cutouts for USBs and SD card, as well as a mounting loop for attachment to bags or keyrings. 📦Hardware used in this build: 🧠 Raspberry Pi Zero WH ⏰ RTC Module : RTC Pi DS1307 - Real Time Clock Shield 🔋 Power…
This Tradfri Shortcut-Button mount is designed to replace your old light switch. The part which looks like a cross is screwed into the flush mount box. A 20mm x 2mm Magnet is placed on the back of the case. The case is screwed with M3…
This Tradfri Shortcut-Button mount is designed to be added to a Typ 2511-2 light switch. The light switch will be used to secure the case on the wall. In addition to that, double-sided tape can be placed at the rectangular cut outs at the…
I wanted a case for my RPI3B+ and it's UPS and I just could not find one so… here it is.
Same as Artcfox's model but with the settings applied in Orca Slicer/bambu studio
Just a little thing to hang the CaDa Sportcar flat on the wall. Mine is hanging there like 11 month and seems to be stable, even with its weight. Print the mount and 2 pins, they might have to be glued in. Designed to be printed without…
The hooks from the remixed model are amazing and their connection to the base place is perfectly practical and strong, I just needed the tips to be taller to accomodate my millions of leashes so sharing my edit. I only edited 2 - Hook…
Gita/Sportcross Roof Rail Replacement Mid Cover, which seem to be unobtainable from Toyota. It will need finish work to match it up to the metal parts as I've over sized it in a few areas There is a slight curve on base of the front…
Partcolingfan duct for my Prusa MK3s with stabilizer on the fanmounting-screw --- Teilekühler-Düse für meinen Prusa MK3s mit Stabilisierung an der Kühlermontageschraube
This is my first prototype of MIDI / keyboard shortcuts controller using raspberry pico. The main.py program works fine. I tested it as a keyboard controller to Adobe Premiere Pro. You may also liked some of these projects:…
Props to thrutheframe for his Bentobox air filter, which inspired this work. Shortcake attempts to take the same ideas with optionally identical capacity, and realize them in a smaller space with fewer parts. Ideally, it is now so simple…
This is a model optimized for 3D printing, 245 and 205 mm sawblade compartments, the depth has been increased by 5 mm to store tall sawblades For greater durability of the hinges and latch attachment in the slicer, you can add modifiers…
Here is my take on building an open source volume control knob with editing or other shortcut profiles. This means you can control the volume, play and pause music, scrub through your timeline, cut layers, adjust brush sizes and many more…
Mit diesem Halter kann ich unsere beiden LiON Smartcharger samt Stecker sicher in der Garage aufbewahren.
Petit stand fait vite fait pour plusieurs types d'amortisseur avec des petites coupelles pour mettre les pièces
Puzzle pro výuku klávesových zkratek. Obsahuje i model prázdného dílku, kam je možné doplnit vlastní text.
LEAD ME NOT INTO TEMPTATION, OH WHO AM I KIDDING, FOLLOW ME I KNOW A SHORTCUT, SIGN Category: Signs & Logos
Simple tablet helper plate - for upper buttons on graphic tablet xp-pen 7 mini. There are holes for symbol of the button. You can use precreated symbols (by icons from Zoner Photo studio X) or you can create your own symbols. Of course,…
In German: https://www.printables.com/model/1252458-haustierfutterautomat-fur-wellensittiche-hamster-m Parts List 9g Servo Motor RTC Module (based on DS1307 , with I2C ) Microcontroller (e.g., Arduino Uno , ESP32 ) PET bottle for food…
This is a simple mounting bracket to allow you to mount your smart camera to a wall. The camera slides in place and there is a cutout in the back to allow you to feed the cable through if required. There are two versions, one with screw…
da der Gurtriegel immer zu weit runterrutscht habe ich diesen Halter konstruiert um ihn in einer greifbaren Position zu halten und sich lästiges Gefummel zu ersparen . Since the belt latch always slides down too far, I have designed this…
How many cart coins does a person need? Not enough I would say! Meet the € 1,- sized CartCoin Coin! Open your cart within 3 easy steps! Stick it in Unplug the cart Retract it! Printing recommendations: FILAMENT TYPE Anything. Except…
agility inserts
Two board mounts. One for the Uno itself and one for both an Uno and a RTC (real-time clock) board. The Uno has clips that hold the board down. The RTC mount has standoffs, but doesn't hold the board down. I plan to just use a dab of hot…
Official printable parts of ShortcutDeck Macro Pad! Full documentation, tutorial and sheets here Feel free to remix, make your own variations and reupload!
Have been working on this clock for a little while and needed an enclosure, and this one does the job very nicely (thanks to creator), and I used part of the Desktop widget clock for the screen insertion into the face (again, thank you).…
Originally I had a perch that fit on top of this, but the cat never used that. This gives the top some more utility. This is meant to fit onto the corner of the cat scratching post, to attach a stringed toy. There are 3 total parts: left…
Die neue version der Rabe von Obstgärtchen bleibt nicht gut stehen, also habe ich füse gemacht. 0.12mm geht etwa 18 min. Sollte leicht klemmen.
Additional for https://www.thingiverse.com/thing:4288118 to fasten a lanyard I used the ShieldConnector_V2 4 from 4288118 but thingiverse will not find it in the "remix-field" Print Settings Rafts: No Supports: Doesn't Matter Resolution:…
With the shortcut button, a light switch can be connected to an Ikea lamp or the hub. The power to the lamp behind the switch should be permanently connected. In case of ignorance, an electrician is required. a Busch and Jäger light…
I wanted to create this and needed a place to mount the RTC https://learn.adafruit.com/macropad-2fa-totp-authentication-friend
![OpenForge 2 Dungeon Stone Portcullis [RE-UPLOAD]](https://media.printables.com/media/prints/f4084692-3705-46e3-9ff9-65d7af173f7b/images/12680853_babe0e93-8638-4b21-a3b4-b517e0678e74_57b80a57-fa1d-4979-b38b-8b6335022dea/portcullis2xnarrow.png)
