Double double helical bearing gearset
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's still printing, but this is a mash-up between two interesting models. https://www.thingiverse.com/thing:4175573…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
It's still printing, but this is a mash-up between two interesting models.
I'm attempting to print-in-place with my multi-tool E3D Tool Changing printer (https://e3d-online.com/tc-ms). I'm printing using PLA for the body, and water-soluble PVA for supports.
The theory is that I can peel this off the print-bed, soak in water, and it will move. We'll see!
Update: The torid part on top started not printing right, so I had to stop the print before it finished. After soaking in 2 gallons of hot water for a few hours, I loosened the individual balls with a needle nose pliers, then mounted to a board with screws and spun them to loosen up.
Category: Engineering