Double double helical bearing gearset
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's still printing, but this is a mash-up between two interesting models. https://www.thingiverse.com/thing:4175573…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution
It's still printing, but this is a mash-up between two interesting models.
I'm attempting to print-in-place with my multi-tool E3D Tool Changing printer (https://e3d-online.com/tc-ms). I'm printing using PLA for the body, and water-soluble PVA for supports.
The theory is that I can peel this off the print-bed, soak in water, and it will move. We'll see!
Update: The torid part on top started not printing right, so I had to stop the print before it finished. After soaking in 2 gallons of hot water for a few hours, I loosened the individual balls with a needle nose pliers, then mounted to a board with screws and spun them to loosen up.
Category: Engineering