1 / 4
6 Spoke RC Drift Wheel - 12mm hex - 55mm OD — zdjęcie 1
1 / 4

6 Spoke RC Drift Wheel - 12mm hex - 55mm OD

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

RC car wheel to be used for drifting. Designed to fit on my 1/18 LaTrax based RC car. Print in black and paint rim.

Ocena
4 / 5
Polubienia
16
Pobrania
141
Wydruki
1
Wyświetlenia
897
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

One piece wheel and tire for drifting. 1/18 scale to fit on Traxxas' LaTrax or similar models (like Tamiya M series ) . 

It prints fine with a 0.2mm layer height. Achieve best results by printing the wheel face up with black material. No supports are needed for the spokes but the central hex and surrounding hub interface will need supports. Example is printed from black ASA with 0.2mm layer height and finished with a silver paint pen. 

Unusual but in this case I recommend using randomly placed seams to avoid a flat-spot or bump on the wheel. 

Style note: the tire sidewall dimensions are scale to a 12in wheel on a classic mini and the wheel is loosely styled after a Rays Volk TE37. 

Tagi