Nut and bolt storage boxes 4in wide 3.5in tall, multiple lengths and compartments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these around a thrift store film cabinet I found, you can scale them in the slicer to your desired size.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 199
- Wydruki
- 1
- Wyświetlenia
- 812
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these to have 1.6mm walls a multiple of .4mm nozzle size, my printer has no trouble printing .8mm walls on a .4mm nozzle so 2 passes on the walls, your mileage may very. If you cant print them at .8mm walls you can do 4 walls at .4
Some setups should be able to do 1.6 in a single wall if you turn the speed down low enough, Ill do some testing and see if I can make it work.
If you scale the boxes in the slicer you will need to play around with wall thickness settings.
Bottom is .8mm thick so 4 layers at .2mm, the filleted edge should give very good part adhesion between the bottom and the sides but adds some print time.