Nut and bolt storage boxes 4in wide 3.5in tall, multiple lengths and compartments
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed these around a thrift store film cabinet I found, you can scale them in the slicer to your desired size.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 196
- Makes
- 1
- Views
- 807
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I designed these to have 1.6mm walls a multiple of .4mm nozzle size, my printer has no trouble printing .8mm walls on a .4mm nozzle so 2 passes on the walls, your mileage may very. If you cant print them at .8mm walls you can do 4 walls at .4
Some setups should be able to do 1.6 in a single wall if you turn the speed down low enough, Ill do some testing and see if I can make it work.
If you scale the boxes in the slicer you will need to play around with wall thickness settings.
Bottom is .8mm thick so 4 layers at .2mm, the filleted edge should give very good part adhesion between the bottom and the sides but adds some print time.