Prusa mini squashball feet Low Profile noise reduction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw that nobody made any low profile squashball feet for prusa mini so i did.
- Ocena
- 4,924 / 5
- Polubienia
- 426
- Pobrania
- 1861
- Wydruki
- 52
- Wyświetlenia
- 12 921
- Oceny
- 79
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I saw that nobody made any low profile squashball feet for prusa mini so i did. The design is inspired by some other creators, with my own spin. Legs are push to fit, so no screws or bolts needed. i recommend printing 4 feet total for better stability, but it works with 3 (2 on the right side and one one the left).
IMPORTANT:priner will be a lil crooked with only those feet (it dosent affect print quality tho) if you want your printer to be leveled you should print this https://www.prusaprinters.org/prints/44553-prusa-mini-squashball-feet-z-axis-support
Print instructions
3 layers , 20% infill, print on its side. To insert you need to bend it a little bit. Push the ¨bottom¨ part first then hold it and slide the side in place, all will click in and youre done.