Blink XT2 mount for 2" post
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My dad needed a way to mount a Blink camera without making any holes or modifications to the exterior of his condo.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 1178
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My dad needed a way to mount a Blink camera without making any holes or modifications to the exterior of his condo. So I whipped up this little mount that clamps to the 2" post of a light in his front yard.
When assembled there should be a 4mm gap between the front and back pieces. It's designed to screw together with 2 30mm 3mm cap head screws.
Note - if you don't use the spacer that comes with the blink mount you may need to use slightly shorter screws when mounting the blink mount to this.
The Fusion360 project can be accessed here: https://a360.co/3dqfGpO
Print instructions
Unassociated tags: camera mount, post mount
Category: Outdoor & Garden Summary
My dad needed a way to mount a Blink camera without making any holes or modifications to the exterior of his condo. So I whipped up this little mount that clamps to the 2" post of a light in his front yard.
When assembled there should be a 4mm gap between the front and back pieces. It's designed to screw together with 2 30mm 3mm cap head screws.
Note - if you don't use the spacer that comes with the blink mount you may need to use slightly shorter screws when mounting the blink mount to this.
The Fusion360 project can be accessed here: https://a360.co/3dqfGpO