Wireless iPhone Charger and Gift Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wireless charging stand based on Yootech charger with fitted gift box
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 441
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of EdgeyErnie's Thingiverse model Yootech Wireless Charging Stand. The charger I bought is bigger than his, so I had to redesign it. I ended up redrawing the whole thing in Fusion 360 and changing the appearance a bit.
It holds the phone in either vertical or horizontal orientation. It has optional weights in the bottom so it doesn't tip over when empty.
Since this was a gift, I also designed a gift box for it. The bottom half is molded to fit the charger. The top has a drawing of a bow engraved into it.
Parts Needed
Yootech wireless charger. I used this one. It is 95mm in diameter. https://www.amazon.com/dp/B079KZ49PJ
Weights (optional). https://www.amazon.com/gp/product/B0851J3T8V
An iPhone X, Xs, 11, and probably some other models. You can change the model parameters to fit other phones or thicker cases.
Printing Instructions
Print in PLA. To print the bow in a contrasting color, switch colors at 1mm height.
I used MatterHackers Quantum PLA. The charger is Silver Purple, and the box sides and bow are Blue Yellow. The box top surface is black. The box bottom is natural PLA. I used 5% infill and gyroid infill pattern, which shows through the translucent surface.