1 / 2
Starlink to harbor frieght 20ft telescoping flagpole adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part adapts a Starlink v2 dishy (square) to work with a harbor freight 20ft flagpole.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 665
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
Please use petg or abs or asa to print this. It stays outside and pla could become problematic.
Use a block of wood and a mallet to drive this into the flagpole. The ribs will shear off and leave a perfect fit.