1 / 1
Thwack Handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I would suggest printing this upright. You can print it in less hardy materials like PLA as it won't sustain much of a beating. Make sure to print with plenty of perimeters and top and bottom layers. I think mine were 2.4mm thick!
You will need to print the thwack hammer with the hammerhead pointing downward and pause / cancel the print just before it reaches the handle. Check your slicer for instructions on how to schedule a pause in the G-code.
I used Nylon for the hammer section and PLA for the handle.
Goodest of luck.
https://www.printables.com/model/46099-thwack