Thwack Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ONLY the handle. This is if you wish to print the Thwack in two separate materials that press-fit together.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 25
- Makes
- 0
- Views
- 465
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I would suggest printing this upright. You can print it in less hardy materials like PLA as it won't sustain much of a beating. Make sure to print with plenty of perimeters and top and bottom layers. I think mine were 2.4mm thick!
You will need to print the thwack hammer with the hammerhead pointing downward and pause / cancel the print just before it reaches the handle. Check your slicer for instructions on how to schedule a pause in the G-code.
I used Nylon for the hammer section and PLA for the handle.
Goodest of luck.
https://www.printables.com/model/46099-thwack