1 / 8
Foldable phone holder, Faltbarer Handyhalter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple small format mobile phone holder that can be easily built without screws. To connect the two halves:…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 200
- Wydruki
- 1
- Wyświetlenia
- 784
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (20)Powiązane
This is a simple small format mobile phone holder that can be easily built without screws.
To connect the two halves:
- Take a piece of your 1.75mm filament and cut it so that there is about 2mm left on both sides
- Place the piece as an axis through the hinge.
3.Melt the filament with a lighter and press it flat with the side so that the end can no longer slip through 3. Perform this step on the other side
Category: Mobile Phone