1 / 4
Bearing press-in tool for di=12mm, Do=21mm (Canyon MTB frame bearing) — zdjęcie 1
1 / 4

Bearing press-in tool for di=12mm, Do=21mm (Canyon MTB frame bearing)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bearing press for bearings with 12mm inner diameter and 21mm outer diameter. Requires M10 screw, washer and nut.

Ocena
0 / 5
Polubienia
19
Pobrania
35
Wydruki
0
Wyświetlenia
623
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Made this simple bearing tool to replace the frame bearing in a Canyon mountainbike. To use this, you need an additional M10 screw (length depends on your frame), 2 matching washers and a nut.

The bearing side has an additional cylinder on that the bearing can be attached. It also has a narrow protruding rim, this assures that the pressing force is applied to the outer circumference of the bearing and not to the inner ring (applying it to the inner ring can damage the bearing).

The opposite part is slightly larger than the bearing to allow it so sit on the frame hole.

Prints without support.

Tagi