Enclosure for ADT-Link R43SG EGPU *UNTESTED*

!!!! WARNING !!! THIS MODEL HAS NOT BEEN TESTED YET, PRINT AT YOUR OWN RISK! 

A friend wanted an enclosure for the gpu that powers his compact media transcode server, there weren't many options out there for the ADT-Link R43SG so i have made this for the job, it uses a flex-atx power supply to power the card. I HIGHLY recommend that you print this with a 0.8mm nozzle as it's a big boy. To assemble you will need a couple meters of m6 threaded rod, some m6 thumb nuts, a countersink bit, epoxy and some superglue. 
Superglue the front in place, measure and cut your lengths of threaded rod and feed them through with epoxy to hold them in place, add the second body piece with more epoxy and maybe a dab of superglue if you feel it needs it, put the psu into the back piece and secure it, install the adapter and the gpu onto the plate and then put the back and plate in all at once, secure it all with the thumb nuts. 
I have provided a .svg of the plate so you can get it laser cut from 8mm acrylic or similarly stiff material. You will also need a countersink bit for the screws beneath. When i've finished testing this i'll update the .3mf to already have the countersinking for those that choose to print it but i'm pretty exhausted from modeling this and can't be bothered yet.