3DSets Model 6 - Rancher Wagon stand

I made this stand loosely based on the one made by xBenny (https://www.thingiverse.com/thing:4139282) for the original Rancher. But since the Wagon version has the center of gravity further back I felt I needed something different.

There are three parts to the stand, the Stand itself, the Feet and the Pin that rotates around the Feet. There are 3 different files for the Feet, based on how much of a gap you want with the Pin. There's the 0.2 mm gap, the 0.1 mm gap and the one with no gap at all. Personally I used the version with no gap and set the ‘XY Size Compensation’ on PrusaSlicer to ‘-0.05’. I printed all files with this setting.

If you'd like, I uploaded two ‘testfit’ parts (male and female) with 0.1 mm gap for a quick fitment test. If the fit is too tight, go for the 0.2 mm gap. If it's too loose go for no gap.

For assembly, you need 3x M3x12 and 3x M2x8 bolts. The M2 bolts aren't strictly necessary but they help with reinforcement. You can also add some PTFE grease where the pin rotates for a smoother spin.

PS: After printing I added a depression on the stand so it does not collide with the control arms on cars with longer shocks. I haven't tested it so feedback is appreciated.