DJI Mavic Air 2 8" tablet mount for iPad Mini, etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remake of GurtKnev's 8" tablet holder that is a little narrower to better fit my case.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 232
- Wydruki
- 0
- Wyświetlenia
- 1933
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
This is a remake of GurtKnev's 8" tablet holder that is a little narrower to better fit my case.
YOU MUST USE SUPPORTS
I ignored supports in my first print by accident, but the piece was designed so well that it still worked fine, even with a floppy ear.
I used this model to test printing in PETG. I think I like that print the best (the orange version). Some folks have commented that it must make the controller heavy to hold. Before this, I used a metal pinch mount from Amazon that weighed much more than this solution. I might try a remake with a lanyard mount next.
I did all of the model modifications in PrusaSlicer, so I can only attach GCODEs now. I'm working on re-doing the changes to the original STL in a CAD program to upload the STLs.