LED Strip clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love these little guys!
- Ocena
- 4,25 / 5
- Polubienia
- 68
- Pobrania
- 388
- Wydruki
- 3
- Wyświetlenia
- 2179
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I love these little guys! The glue on the LED strips is not the best, so when I installed my 10mm wide strips I sketched up some little clips so the LEDs would be a little more secure.
I printed 21 of these in 12 minutes and they simply worked. Its a loop for a woodscrew and a bar. Simple yet effective.
Print instructions
I printed them in PETG, you may be able to get away with PLA, but the LEDs do get a little warm so the clips may creep after a while.
These are so small that infill is unlikely to matter, I used 10%
No support is necessary
Don't use a brim (they're so small that removing it would be a nightmare)
I used a 0.2mm layer height