1 / 2
Lego Bionicle Classic Toa Mata Feet - reinforced and made printable
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A classic Lego Bionicle piece in easy to print edition!
- Ocena
- 0 / 5
- Polubienia
- 79
- Pobrania
- 605
- Wydruki
- 0
- Wyświetlenia
- 2920
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (113)Powiązane
This feet piece was moddeled after original Toa Mata feet, but with modificatons reinforcing the socket for the ball joint and decreasing amount of supports needed.
I recommend to print in PETG (this is what I've tested).
Print with supports in supplied orinetation.
For best results use 0.1 mm layer height and 100% infill.
