Liczymy pasujące modele…
Using Remix as a reference, I created a model that does not require additional parts such as bearings, bolts, or shafts, and can be produced using only a dry box, PTFE tube, and a 3D printer. Requires 4x: 608 bearings 1x: PTFE tube Φ4mm…
Reupload from amaochan on Thingiverse. Automata (moving model) with a handle, polar bear an seal move in sync.
This is my entry for the “mechanial marvel” contest, I designed this model specifically for the contest. The mechanism is 100% 3d printed , no need for bolts and nuts, and all the pieces snap on together , so no need for glue either. This…
I have put together a couple of 3MF files that have a few helping hands on printing this nice figure that I've remixed from MatheusEvan. My model sits at about 17cm. I found the original model was quite big, it had a very large base that…
Changes: 2023/12/25 - It was reported that some of the stl files were not working, so I have uploaded “stl_fix.zip” containing fixed version of the files "okayu_base_small.stl" and "okayu_leg_right.stl". --- This is a sculpt that I…
Heat or glue here as it will pull out if left in place.
Just adding a few missing pieces to the wonderful community effort, and collating them into one thingiverse - to create the posable toa mata as I'd imagined them as a kid. In particular: Created articulated arm/leg Created articulated…
This feet piece was moddeled after original Toa Mata feet, but with modificatons reinforcing the socket for the ball joint and decreasing amount of supports needed. I recommend to print in PETG (this is what I've tested). Print with…
I really wanted to find a high quality poseable Short Stubby model from NieR: Automata, and when I couldn't find anything that really ticked all the boxes, I decided to make one myself. This kit will require some post processing and a…
I submitted an improved version . September 20, 2023 Filament dry box using dry food stocker 6.0 from Inomata-K. イノマタ化学の乾物ストッカー 6.0を使ったフィラメントドライボックスです。 Requires 1x : Dry food stocker 6.0 / 乾物ストッカー 6.0 2x : M5 screw 70mm / M5ねじ 70mm 2x :…
Team, this is my first model uploaded here, nudged by the contest!! This is an original piece , mechanical automata , manually actuated , without the need for any non-printed parts . This is inspired by recent world events. I'm making my…
This is one of those prints that makes anyone appreciate how capable modern 3D printers really are. In less than seven hours you get a fully mechanical automata - no screws, no glue, no tools. Everything prints, snaps together, and just…
UPDATE: 10.02.2025 -Added full assembly in step format. 04.10.2026 -Updated mag release linkage to correct version. Nekomata: A family of remixes of the Lynx 2.1.0 platform that incorporates some original design along with a collection of…
Źródło oznaczyło ten model jako treść 18+.
A simple automata model of bat wings Print instructions These bat wings move in a flying motion thanks to the 3D printed gears, cams and rods. This print requires some 3mm tube/rod to act as the hinges in the wings (2x80mm & 1x100mm &…
Uploading all of the Minmatar ship models I exported from Eve Online many years ago as a single package of all Minmatar ships, from drones to capitals. Excluded are the Reaper and the Rifter as these are freely available elsewhere.…
The original MK2 by Kazmar was released. The build processes are significantly improved. Please check it now! https://www.printables.com/model/585925-filament-drybox-inomata-k-mk2 - September 20, 2023 - Dear Japanese users.…
Źródło oznaczyło ten model jako treść 18+.
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
This is a skull of a miniature chameleon from CT scan data. It prints well with breakaway support.
The video: The assembly: Step 1 Step 2 Step 3 Warning The position of the lines is extremely important for the functioning! The pieces: X4 - Pin Horse G X24 - Pin Horse P X4 - Automaton A X5 - Automaton B X4 - Automaton C X4 - Automaton D…
This is the monthly project for subscribers at Printkits.com. You can find more information such as the full BOM right here: https://printkits.com/blogs/news/mantaray
UPDATE: 10.02.2025 -Fixed Rail Screw Hole Positions on Shroud and Spacer Rails. -Added full assembly in step format. Nekomata Lonx 2.1.0 Nekomata: A family of remixes of the Lynx 2.1.0 platform that incorporates some original design along…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
UPDATE: 10.02.2025 -Added full assembly in step format. Nekomata: A family of remixes of the Lynx 2.1.0 platform that incorporates some original design along with a collection of various modifications I liked. New Features : -Full flat…
This is an early 3D model of Diana from the game Pragmata . Since official assets are non-existent, I decided to create my own version. Key Details: Status: Work in Progress (WIP). This is a fresh release, and I am still refining the…
Isobu: two-Tails Beast (Naruto)
NieR:Automata HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.6 PLA+ eSun Gray Transmission Distance: 2.5 PLA Kingroon Skin Transmission…
YouTube Video - link This miniature version of the iconic 2001 BIONICLE canister is designed to perfectly match the new CMF Tahu Cosplayer. It's a fun display accessory that captures the nostalgic look of the original Toa Tahu packaging…
Tempo Matador (VW angine) 1954 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Blocky Codes modular blocks are capable to create many cool projects, To see the step by step guide please visit my tutorial on instructables.com
You can now create your very own automata, using this Modular Automata kit, pick and combine motion types to create your custom automata. There are three types of mechanisms, that provide rotational, sliding and vertical movement. This is…
In it you can leave your bracelets, pendants, rings and at the same time you can decorate your home by immersing it in an underwater atmosphere. (Apart from jewellery you can leave your house keys, wallet...) Want to sell prints of the…
These are just the 3D printed parts - other parts and tools are needed to complete the model (see below). Be aware that this isn't an easy build! Other parts needed (and what I used): Braided fishing line (35lb 4strand black) 3mm diameter…
You love the dancing penguin emoji? Great! Then build your own dancing penguin! All the motion is driven by one cheap stepper motor and an arduino! No need for servos. Here is what you will need: 1x Arduino Nano 1x 28BYJ-48 with ULN2003…
Round Hydrometer Mod for Filament Drybox Inomata-K Mk2
This is remix of one of masks from here ____ Changes to original file: Scaled to ~800% to fit Prusa XL Painted supports for tree type - open in Prusa Slicer Mask oriented for minimising supports Mask pegs are separate gemetry Printing…
NOTICE: Soon adding a model that is the mechanism with the sleigh, and the box combined! A cool automatic toy that has Snata and his reindeers that can move in you spin a lever!
A Seatpost cover for my Aventon Mataro so that the standard Seatpost fits better to the aero shape of my bike frame. perintet fron regular pla
Print 1XPipe and 2XParts. Put recv in Pipe. Put Inner and 6 BBs. Place BBs equally spaced in the groove. Place a retainer. Push it in firmly. Do the same for the other side and make 2 Rollers.
Fully 3d printed water droplet automata. Fully adjustable to different patterns using hex rod. Can be printed without supports but the base I would suggest use supports for all other parts should be good without. Friction fit pieces,…
Eve Online's Minmatar Maelstrom! One of my favorite ships. Made it 16-inches long and sliced it so its easy support-less printing. Also added 'keys' everywhere to help connect the pieces together before gluing. Print Settings Printer…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Monster from the horror-themed, now barely functional MMORPG Requiem: Bloodymare / Memento Mori / whatever. Eight different poses. Blender is able to import animation files for most models from this game, so more poses are possible if…
イノマタ化学の容器で、できるだけ少ない3Dプリント部品と加工でスムーズに回るフィラメントドライボックスを作成した。 https://note.com/cute_dunlin171/n/nf12b3557ec5e 段ボールスプールの一部は滑りが悪いのでベアリングを2つ使用するローラー構造とした。 サイドプレートだけ両面テープを使用して容器の内側に貼り付け、他は簡単に圧入できる寸法。 サイドプレート貼り付け位置は上部が容器のフチより少し下。…
Taking the available files from Calamity's Digital Constraction Collection I was able to mod the mask from Toa Mata Nui's build into a Printable form for use on builds Still have work to do in order to look 1:1. Print Settings Printer…
Font “Hakuna Matata” with screw holder on the back
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
I reccommend “ironing” feature from Cura for better quality also printed it 2color cause of switching filaments while outer Emil's face and “NieR” text
Pecky Bird è un automata meccanico stampabile in 3D che porta il divertimento e la magia della meccanica in miniatura nel palmo della tua mano! 🎡 Aziona la leva e guarda il piccolo uccellino che becca ritmicamente il suo trespolo, grazie…
Nekomata's dagger from Zenless Zone Zero. Nothing specific requiredfor printing other than attune it to your desire, whether it's for props or for decoration.
A 9cm of diameter coaster/badge with the Yorha Logo in it. Print in Place. GLORY TO MANKIND!
Here's my version of the Mata Nui totem/stone from the Mata Nui Online Games. Its about 2 and a half inches tall. Category: Props
Mirko - automata butterfly toy is made to fulfil all necessary requirements defined by Printables for Technical Marvels competition. It is made out of several parts that can be glued or secured by screws, there are moving parts (I chose…
🌟 Introducing the "DALMATA LED LAMP" Lightbox! 💡 Brighten up your space with the charm of the "DALMATA LED LAMP" Lightbox! Featuring a delightful Dalmatian design, this captivating lightbox will add a touch of whimsy to any room. Here's…
We have broken most of our Vex robotics crank handles, likely because of the torque the students frequently apply to them. This handle has a loose rotator that allows for high-speed cranking, and it's a slightly larger piece. It was…
Imán de nevera, está preparado para que los imanes sean internos hasta 3 de 4 mm. Y para imprimir en 2 colores. Los imanes hay que ponerlo en 1.6mm y el cambio de color a los 3 mm. El gcode que he puesto incluye estas paradas. El gcode lo…
For any member of Matara Kan's community wishing to show pride with something they have printed.
Estoque de torero. Necesita una barra roscada m3 y 3 tuercas. Category: Props
Replica of the knife that Viggo Mortensen used in Alatriste movie, a spanish film based on the novels by Arturo Perez-Reverte, "Captain Alatriste", depicting the life of a spanish soldier on the XVII century that becomes a…
Shaft actuator sleeve for apron-mounted foward-off-reverse lever switch on Weiler lathes Fits Weiler Praktikant, Matador and Condor models using the mechanical switch shaft linkage design. Version 1 is an accurate recreation of the…
He diseñado la legendaria espada Mata Dragones de Guts la espada no nesesita soportes la espada mide 180 cm como sopoerte para la espada se necesita una varilla de 25 mm y 6 varillas de 5 mm
Luxury hotel
This was designed using Terrain2STL to generate the terrain for Tāmaki Makaurau / Auckland. The Print is 100 x 100mm so it should fit on almost any printer and at 34g of Filament, it is pretty cheap to make.…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.06x194.21mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2mm and the Actual Depth is 2mm…
gacharpoon assassinando o noob do forsaken
Every year since I got my first 3D printer, I've designed a custom printed gift for my family, trying to one-up myself every year. They are usually really personalized so I don't upload them, but this one is more universal and I got very…
⚠ Step 0: Replace the Battery. Seriously. Before printing this case: Open your AirTag. Replace the CR2032 battery. Close it. Because once you seal it inside this case… there’s no going back. Battery dies = case dies. Simple as that.…
Introduction: The Quest for the "Holy Relic" of Filament Management If the name "Inomata Kagaku Dry Food Stocker 6.0" rings a bell, you are likely a comrade-in-arms in the nightly battle against filament moisture. In FDM 3D printing,…
This is a automata box with a guitar and music note being moved vertically with a hex cam and an eccentric cam that move 2 objects up and down with 3 different shafts and a crank on the right side of the box. the objects on this one are a…
These ANTI-SAG cablechain is working without buying any stainless steel metal-strap or something else! ALL PARTS ARE PRINTED! You need 8 chain- and 8 holdingclips, 1 Swingarmholder and 2 Swingarmholderclips and 1 Extruderholder. The…
A highly detailed collectible bust of 2B, the iconic combat android protagonist from the critically acclaimed action RPG NieR: Automata . The model captures her elegant yet deadly design, featuring her signature short bob haircut,…
A simple frame designed to fit the WMATA PCB board from Traintrackr . Left side USB access port is sized for the cable provided with the board. May need adjustment for other cables. Due to the size of my printer (PrusaMK3s), the top and…
Wandhalter für die Zip Beutel von Lidl. Endlich fliegen die nicht mehr lose im Abstellraum rum. Ich habe die Wandhalter mit Tesa Powerstrips befästigt. https://amzn.to/3zfcc4F
I have made the obstacles to add to the original kits I also made the coding blocks at 250% scale with a spot for a magnet in the back so that you can use it as a teaching aid. I have also made an tile organizer for the tiles that fit…
Silly extended draw Lonx with 200mm draw. Uses stock pump bars, custom body bars, and a printed transfer bar. Avoid seams on the bar at weak points. Use the Chibi Lynx or stock Nekomata parts for anything excluded. Takes 11" springs…
Can be used as a replacement lid for the Inomata-k “Dry Goods Storage Container 6.0”. If you don’t want to drill holes in the original lid (because it’s a hassle), you can easily drill holes in any desired position using a slicer. You can…
This Hakuna Matata coin was created by embedding a United States 50-cent coin in the middle. I recommend printing with 100% infill. The design can be printed face up or down(mine was printed facing downwards). Print without supports and…
Modelo de un perro dálmata adulto para imprimir en resina y PLA. La base se puede personalizar con un nombre.
Pretty straightforward, cups and lids sized for the Yamatai boats to keep them organized and easily use in play. Category: Games
Ersatzteillager im Aufbau für altes Holzspielzeug zum selber drucken
ai assisted and color mapped
These tiles can be fit together as jigsaw pieces, and when assembled, will implement the elementary cellular automaton known as Rule 110 . They should ideally be printed in two different colors as shown, so that tiles representing a value…
A stylized Hei Matau amulet in the form of a pendant. Carved into the shape of a fishhook, the Hei Matau pendant grants protection, strength, and prosperity to the wearer. It could give you special powers to ward off evil spirits.…
This is Noma-Dryer Lite , a smart, snap-fit silica gel tray designed specifically for the Inomata Dry Food Stocker 6.0 (イノマタ化学 乾物ストッカー 6.0) —the absolute gold standard for DIY filament storage boxes in Japan. This model is a companion to…
Removes the slop from the PKI mag release when using the nekomata/foamgasm forward mag release. Make sure to press the linkage firmly into the hole
I reworked my earlier crank handle when I found that the students were still breaking the barrel off the stem (the Teenager Test). This one is best printed with three vertical shells, with the parts in the orientation I have shown in the…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x160.03mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
This stl is a 3d printable scale model of the Armata Universal Combat Platform, a realistic armoured military vehicle for tank diorama and display. Great for wargaming, tabletop scenery, collectors, and hobbyists building armored warfare…
LEGO Romani čhinimata linija
Some small modifications to the Nekomata Lynx and Minx files to add the raised optic rail back and a pki-esc integrated cheek rest. Only the receiver-l has been modified because that's the specific one I use (I'm lazy and didn't want to…
This is a replacement for the cord mount of an iPhone (13) case from Oceanmata: https://oceanmata.com/products/biologische-apple-iphone-hulle-corall-band-edition Printed in PLA with 100% infill.
