1 / 4
Ryobi Shop Vac 50mm hose adaptor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adaptor uses the original clip in collar and allows you to use 50mm ID vacuum hose.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
This adaptor uses the original clip in collar and allows you to use 50mm ID vacuum hose. You need to separate the two parts first and replace the original hose adaptor with this one. Then screw in 50mm ID hose into the reverse thread. The two should pull apart with some force or use a screw driver to pry them apart. Prints without supports.
https://www.buymeacoffee.com/unclerob
