Ender 3 S1 (Sprite Extruder) Zero Y Offset CR-Touch Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 S1 (Sprite Extruder) Zero Y Offset CR-Touch Mount - Corrected Y-axis offset and self-tapping screw holes
- Ocena
- 4,769 / 5
- Polubienia
- 133
- Pobrania
- 1289
- Wydruki
- 13
- Wyświetlenia
- 10 491
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement backplate for the Creality Sprite Extruder (comes with Ender 3 S1 / S1 Pro). This backplate allows you to line up the CR-Touch probe with the y-axis of the nozzle. This has solved a lot of bed levelling issues for myself and many others, due to issues with the Y-axis rail being slightly uneven on the Ender 3 S1.
This is a remix of JHenley01's model with the Y offset corrected, self-tapping screw holes that don't require nuts, and a cover on the PCB connector pins.
All screw holes are self-tapping, simply use the existing screws and drive them into the plastic by hand. It's recommended you do this first with just the screws (no CR-Touch or cable support) to make the threads, then take out the screws, and then attach everything to the backing plate.
Remember to change your X, Y, and Z probe offsets. You'll need to compile Marlin yourself or install the Professional Firmware.
X Offset: -46.0
Y Offset: 0.0
Print with:
- Material - PETG or ASA/ABS
- Infill - 25% or higher
- Supports - None