Ender 3 S1 (Sprite Extruder) Zero Y Offset CR-Touch Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ender 3 S1 (Sprite Extruder) Zero Y Offset CR-Touch Mount - Corrected Y-axis offset and self-tapping screw holes
- Rating
- 4.769 / 5
- Likes
- 133
- Downloads
- 1,291
- Makes
- 13
- Views
- 10,518
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Replacement backplate for the Creality Sprite Extruder (comes with Ender 3 S1 / S1 Pro). This backplate allows you to line up the CR-Touch probe with the y-axis of the nozzle. This has solved a lot of bed levelling issues for myself and many others, due to issues with the Y-axis rail being slightly uneven on the Ender 3 S1.
This is a remix of JHenley01's model with the Y offset corrected, self-tapping screw holes that don't require nuts, and a cover on the PCB connector pins.
All screw holes are self-tapping, simply use the existing screws and drive them into the plastic by hand. It's recommended you do this first with just the screws (no CR-Touch or cable support) to make the threads, then take out the screws, and then attach everything to the backing plate.
Remember to change your X, Y, and Z probe offsets. You'll need to compile Marlin yourself or install the Professional Firmware.
X Offset: -46.0
Y Offset: 0.0
Print with:
- Material - PETG or ASA/ABS
- Infill - 25% or higher
- Supports - None