1 / 7

Bosch adjusting device 10009551 part for fruit presses MUZ8FV1 and MUZ45FV1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

devlab

@devlab_524896

This is a replacement for plastic part of Bosch adjusting device 10009551 (for fruit pulping attachment). There are…

Ocena: 0 / 5
Polubienia: 1
Pobrania: 52
Wydruki: 0
Wyświetlenia: 504
Oceny: 0

Aktualizacja u źródła: 6 sty 2023

Informacje o modelu

Źródło: Printables
Kategoria: Other House Equipment
Licencja: Creative Commons — Attribution

Szczegóły Pliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (2)

This is a replacement for plastic part of Bosch adjusting device 10009551 (for fruit pulping attachment).

There are two Bosch fruit pulping attachment models that use this part:

The plastic part of Adjusting device 10009551 is relatively weak, so I've redesigned it to consist of 4 parts that should be more reliable. :-)

~~The entire design of the replacement part has not yet been tested and will definitely not be checked possibly by the end of upcoming summer for the obvious reasons.~~

[October 2021 update] The design was tested this autumn and works reliably as expected.

Print Settings

Printer:

RepRap Mendal

Rafts:

Yes

Supports:

Resolution:

0.3

Infill:

100

Filament:

Taulman Nylon 645

Transparent

Notes:

3 parts made of Nylon (outer shell and two spacers), and another part (inner part) made from Flex

Broken part ===========

Printing and assembling

Print nylon parts

Print squizer-inner-top.stl, squizer-inner-bottom.stl and squizer-outer.stl using nylon. I have printed them using Taulman Nylon 645 (using 100% infill, on cardboard without heating printing bed).

Print flex part

Print the squizer-inner-middle.stl using Flex (100% infill).

Assemble all the parts as shown on pictures below