Multi-Size Hex Wrench Driver (parameterized)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned Ed Johnson's Hex Wrench Driver to support multiple sizes
- Ocena
- 4,667 / 5
- Polubienia
- 16
- Pobrania
- 72
- Wydruki
- 3
- Wyświetlenia
- 440
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATE 2024-03-23: I Added Half_to_Quarter_Inch_Handle and Half_to_Quarter_Inch_Pin STL files which just resulted from changing the min/max values of the wrench to these sizes:
I'm calling this a remix because the idea came from Ed Johnson's model (https://www.printables.com/model/89991-hex-wrench-driver-parametric). I liked the idea, but I didn't like that you had to print a different one for every wrench.
So, I checked out his Fusion 360 model and used some of the ideas in recreating my version from scratch. The parameterized Fusion 360 file allows you to specify min/max wrench diameter along with the diameter of the handle and a few other things. It's heavily parameterized, so you can do what you want with it.
The 3mf/STL files (and images) I uploaded are using min/max of 1mm/6mm and the handle diameter of 50mm.
You should be able to print however you want. No supports needed. I printed at 0.35mm resolution w/ a 0.6mm nozzle.
If you don't have Fusion 360 and want other sizes of this, let me know and I'll upload them for you.