Eleks Mana 5.2 enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eleksmaker - Eleks Mana 5.2 enclosure for this nice little 3 axis GRBL board Didn't find one that suited my needs so I…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Eleksmaker - Eleks Mana 5.2 enclosure for this nice little 3 axis GRBL board
Didn't find one that suited my needs so I made a quick one.
There is room for improvements in many regards. I wanted to keep the box tight but still make it possible to remove and install connector (Still a bit tricky).
Made the openings for power plug and USB roomy as all plugs don't have the same size plastic mould.
You will need to drill holes to fit you fixing points unless - you just use some double side sticky foam mounting pads
You must slice the STL's for your machine and filament but you already knew that ;)
Printed my box with ASA and had some problems with delamination and warp, let me know how your print went (and your settings and machine) if you used this filament.
Link to Fusion 360 ant .step files If you fell adventurous and want to remix it. https://grabcad.com/library/eleksmaker-mana-v5-2-enclosure-1
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
200
Infill:
60
Filament: FormFutura ASA Black
Notes:
Sliced my box for the Ender 3 pro this way.
FormFutura ASA
STL large flat against the bed (Sticks almost to good on my PEI flex bed)
Bed temp 90c
Hot end 260c
Speed 40
Print cooling OFF
Support Everywhere
Category: 3D Printing