Micro SD card Keychain/Neckless
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A micro-SD card keychain, so you won't lose your Micro SD!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 580
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Description-
Lossing your micro-SD card all the time when moving files from a Pc/Laptop to your 3D printer? I'm on bored with that statement!
This micro-SD card keychain hopefully will keep you from losing any more micro-SDs.
Instructions-
This is how I 3D printed the parts.
These pieces should fit together pretty tightly. If there two tight, shave off a little tiny bit of plastic in the places circled red.
If you're having problems not being able to pull out your micro-SD card from this keychain you may need to shave off a little bit of material along the sides, which are also circled red.
I made it so that both low and high tolerance printers can produce good fitting parts. Some may need to shave off a little bit of material, and some may not need to!
I Recommend gluing Micro SD card neckless-1 0.4 and Micro SD card neckless-2 0.3 together with superglue or plastic weld. MAKE SURE YOU CHECK IF YOUR MICRO SD CARD FITS PROPERLY IN Micro SD card neckless-1 0.4 BEFORE GLUEING!
I hope everything prints well for you!
PRINTER-
layer height- 0.125mm
Line width- 0.2mm
Infill- 100%
Speed- 50%
Supports- No
Raft- Up to you
Time- Close to 1 hour and 10 minutes for both parts
Extras-
If you have any questions let me know! I'm all for recommendations, if there is something you would like to see changed feel free to tell me!
Thank you-