1 / 6
Never lost Ikea Samla Clip Remix (11l, 22l, 45l, 65l) — zdjęcie 1
1 / 6

Never lost Ikea Samla Clip Remix (11l, 22l, 45l, 65l)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

11l, 22l, 45l, 65l compatibility, f360 file available. Tip: print in half, It works really well and save a lot of time.

Ocena
4,867 / 5
Polubienia
233
Pobrania
1467
Wydruki
41
Wyświetlenia
5398
Oceny
30

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

I needed this great design from Canislupus for a 22l samla box, so I recreate a clean fusion 360 file based on his v1 for sharing and allowing easy further modifications.

Two models are proposed

  • 11-22l samla box clip v1
    • Tested with 11l and 22l, it should be compatible with 5l box too, can anyone confirm that ?
    • Rounded edge to better fit samla box
    • Little chamfer for better print quality
    • Tighter close compared to the 45-65l original one
  • 45-65 samla box clip v1
    • Tested with 45l and 65l
    • Little chamfer for better print quality
    • Tighter close compared to the 45-65l original one
    • I was not planning to publish it in the first place but the print result of the hinge is better with this version than Canislupus original one.  Since it should be identical from the original file I took in reference, I am not sure why but I think it is because I have regenerated the stl mesh from the clean new model I have created, maybe more polygons, so tolerances get better.

Fusion 360 file is available for easy modifications or remix

Printing feedback

  • Print in place, 5 walls/perimeters, 15%-30% infill, any material
  • Tip: half print the model work really well, just cut in the middle (20 mm) when positionning in the slicer as illustrated, half time gain
  • Use some glue or double side tape for a durable fixation on the ikea samla box

Note

All credits are going to Canislupus for his great original design. By chance, we published a remix at the same time on 12/01/2023, have a look at his versions:

Revision history

Date                                       Version              Description                         Comment 
12/01/2023V1.0First releaseBased on Canislupus V1.0
13/01/2023V1.0Update descriptionAdd link to the V2.0 and his remix for 11-22l of the original creator (@Canislupus) published at the same time
19/01/2023V1.0Update name 

Tagi