Synology RT6600ax screwless mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a very basic and simple 15 Minutes print to mount Synology RT6600ax via Tesa Powerstrips (small)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 1135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted my router to be installed on the outer side of my servercabinet, screws are therefore not possible.
Therefore I created a very simple but 100% fit wallmount for Synology RT6600ax Router.
Entire size is designed to fit exactly one small Test Powerstrip, which can hold up to 1kg (so enough to hold the router).
It needs support for the small knob in the middle, but it's my first own model, so no magic from my side.
As the feet of router is longer than the bottom, normal screws would need to stand out of wall by ~3cm, therefore I left option (the two tiny holes as indicator) to still use screws but better looking than a simple screw that will just pop out by 3cm.