Steelie Mount Adapter for OhSnap Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the Steelie phone mounts for the car so that they work seamlessly with OhSnap Grips
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is an adapter for the Steelie phone mounts for the car so that they work seamlessly with OhSnap magnetic finger grip, for those of us who don't want a half a dozen magnetic interfaces glued to the back of our phone cases.
For this print, you'll need a Steelie Plus connector (~$10), and an OhSnap metal ring (~$3).
The Steelie connector will press directly into the print and will not need glue. It's really tight though (on purpose), so you may need to use a clamp to force the connector into the slot in the print. The sticky side of the OhSnap metal ring will attach directly to the flat side of the print. I put the whole thing tightly in a clamp for about 45 minutes to make sure the ring would stay put.
There is also a simple collar for this print that will provide a rim around the OhSnap grip and prevent the device from sliding vertically off the mount if you go over a big bump or something. It honestly doesn'treally need the collar, but it will basically make it impossible for the phone to accidentally dislodge itself from the mount.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
35
Filament:
Hatchbox PLABlack
Category: Mobile Phone