Garmin Fenix 7 charger stand - UPDATED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to hold the puck-style charger for Garmin Fenix (6, 7, etc.)
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 485
- Wydruki
- 4
- Wyświetlenia
- 6716
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I've printed a few charging stands that hold the puck-style charger for a Garmin Fenix series watch. They've all been fine… but I decided to take a crack at modeling my own. It's a little more compact than the alternatives, and I tried to make it more than just straight lines.
Puck-style charger can be found on AMZ: https://a.co/8ctJi8x
First “draft” print was .4 nozzle, .3 layers, 10% infill with PLA. Next print, I plan on better resolution and matte PLA.
You'll need supports if you print it in the orientation that it's in in the file.
Thanks for looking!
UPDATES:
01_14_2023 - centered the cutout for the cord better. AND… finished the first print. All sizes are correct, puck fits great… I'm pleased for now.
01_16_2023 - New version - 1.5. Changes: The base is slimmer in thickness and in width. The support arm has also been thinned out a little bit. Slightly moved the cable clip and filleted the edges a little. I've also removed my initials and the year from the bottom. (Fusion screenshots show v1.5. Real life pics also now show v1.5. 1 pic shows v1 (left) and v1.5 (right) side by side.)
Note: the debossed wolf is not in the included file. I just added it to my personal charger stand.