Voron 0.2 z-screw top mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to hold the end of the Z lead screw in place.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 227
- Wydruki
- 2
- Wyświetlenia
- 1820
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This simple bracket can help hold in place the top of the Z lead screw. This in turn might help with the stability of the cantilevered bed.
BOM:
MR 148 bearing
2x M3*8 screws
2x M3 nuts
Since every build is slightly different, the distance between the 1515 extrusion and the lead screw might be different. For me, it was 5.8mm.
If your Z stepper stalls near the top of the travel, you might need to adjust the depth of the bracket.
Keep in mind that technically it's not advised to constrain a lead screw on both sides. For this to be an acceptable solution, the tolerances need to be spot on.