Voron 0.2 z-screw top mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to hold the end of the Z lead screw in place.
- Rating
- 5 / 5
- Likes
- 57
- Downloads
- 227
- Makes
- 2
- Views
- 1,820
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This simple bracket can help hold in place the top of the Z lead screw. This in turn might help with the stability of the cantilevered bed.
BOM:
MR 148 bearing
2x M3*8 screws
2x M3 nuts
Since every build is slightly different, the distance between the 1515 extrusion and the lead screw might be different. For me, it was 5.8mm.
If your Z stepper stalls near the top of the travel, you might need to adjust the depth of the bracket.
Keep in mind that technically it's not advised to constrain a lead screw on both sides. For this to be an acceptable solution, the tolerances need to be spot on.