Bicycle Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
0,77 € – 0,94 € netto (bez VAT)
Dla pliku: bicycle_computer_mount_adapter v3_0.6n_0.3mm_PETG_MK3S_44m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,85 € netto (środek widełek).
- Masa podana przez autora
- 14 g
- Czas druku podany przez autora
- 44,4 min
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Various parts/tools which could be useful for your bike.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 1377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Update 25.08.2023:
- Added Tire Changer model (untested)
- Added Bar End Caps model
- Added Lamp Mount
Tire Changer (untested)
A tool which helps to remove tires from the rim. You'll need two of them. Be careful because usually much force is applied to these and I didn't test it yet.

Print Info
- ASA (something strong and not easy to break)
- 0.6mm nozzle
- 0.3mm layer height
Bar End Caps
For 19mm inner diameter handle bars. In case the original caps are gone…

They work in the same way as an expanding nut. One M4x30mm screw per cap is required.

Print Info
- PETG (because it's flexible and more resitant against the sun compared to PLA)
- 0.4mm nozzle
- 0.2mm layer height
- this part is more about looks, which is nicer with a smaller nozzle
Light Mount
For 35mm stems. I used it for the Light on my Fixie Inc. Floater.
4x M3x12mm and 4x M3 hexnuts are necessary.

Some more information to check for compatibility with other lights.

Print Info
- PETG (better suited for outdoor than PLA)
- 0.4mm nozzle
- 0.2mm layer height
- this part is more about looks, which is nicer with a smaller nozzle
Adapter for Computer
Bicycle computer mount adapter to rotate the computer by 90°. For tubes up to 32mm diameter. It requires a couple of zip ties to secure it.

Print Info
- PETG
- 0.6mm nozzle
- 0.3mm layer height
- prints nicer with some supports