Bicycle Parts
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.77 – €0.94 net (excluding VAT)
For file: bicycle_computer_mount_adapter v3_0.6n_0.3mm_PETG_MK3S_44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.85 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 44.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Various parts/tools which could be useful for your bike.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 46
- Makes
- 0
- Views
- 1,377
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Update 25.08.2023:
- Added Tire Changer model (untested)
- Added Bar End Caps model
- Added Lamp Mount
Tire Changer (untested)
A tool which helps to remove tires from the rim. You'll need two of them. Be careful because usually much force is applied to these and I didn't test it yet.

Print Info
- ASA (something strong and not easy to break)
- 0.6mm nozzle
- 0.3mm layer height
Bar End Caps
For 19mm inner diameter handle bars. In case the original caps are gone…

They work in the same way as an expanding nut. One M4x30mm screw per cap is required.

Print Info
- PETG (because it's flexible and more resitant against the sun compared to PLA)
- 0.4mm nozzle
- 0.2mm layer height
- this part is more about looks, which is nicer with a smaller nozzle
Light Mount
For 35mm stems. I used it for the Light on my Fixie Inc. Floater.
4x M3x12mm and 4x M3 hexnuts are necessary.

Some more information to check for compatibility with other lights.

Print Info
- PETG (better suited for outdoor than PLA)
- 0.4mm nozzle
- 0.2mm layer height
- this part is more about looks, which is nicer with a smaller nozzle
Adapter for Computer
Bicycle computer mount adapter to rotate the computer by 90°. For tubes up to 32mm diameter. It requires a couple of zip ties to secure it.

Print Info
- PETG
- 0.6mm nozzle
- 0.3mm layer height
- prints nicer with some supports