1U Heavy Server Rack Shelf/Support Bracket Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1U Rack Mount Support for Heavy Servers & Accessories made for M5 Bolts w/ Cage Nuts & Standard Nuts.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 290
- Wydruki
- 3
- Wyświetlenia
- 2654
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Remixed 1U Rack Heavy Mount Support that has a much larger surface area and is made for M5 Bolts & Cage Nuts/Standard Nuts/Wingnuts.
Can be easily modified for M6 bolts or a wide variety of SAE bolts. Harbor Freight sells an M5/6/8 bolt/nut kit for ~6$ and I get a ton of mileage out of them for projects.
My particular use is to hold a Half-Rack Height PDU inside the rack mounted horizontally.
Incidentally this is almost obscenely strong with 6 walls & Gyroid Fill @ 20+% against X, Y & Z stress and when printed with additional overlap support blockers configured to add extra walls to the bolt barrel area and is solid as in the image. I put a 60lb UPS and them with no real give.
I used support blockers with a 6 layer/2.4mm wall to encase the bolt area for extra strength. Done in cura with:
-Per Model Settings -> Modify Settings for Overlaps
Printed in PLA for now but I will reprint soon in ABS/PETG when My X1C arrives for summertime server closet thermal strength.
V1.3 Moved the holes a small bit to accommodate standard M5 Cage Nuts too.
Supports:
Doesn't Matter
Resolution:
0.28
Infill:
20% Gyroid
Filament brand:
PolyMaker
Filament material:
PLA ABS PETG CF