Stella Athena Dresser/Bookcase Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket for a Stella Athena Dresser and Bookcase combo.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
This is a bracket for the Stella Athena dresser and bookcase combo for those mounting the bookcase onto the dresser. For some reason the hardware for this was not included so I made this in order to keep my daughter from eventually knocking the bookcase off the dresser and possibly getting hurt.
Recommended PETG with 4+ walls and same for top/bottom, and I printed the bracket on it's side, but I'd recommend DYOR on print orientations for strength. Also, there are two black screws attached to the dresser at the top I used those as well as the short silver screw that came with the bag with the zip tie to prevent the tall furniture from tipping over. You'll need to pre-drill into the bookcase, and if you wish to use more than 2 of these you'll need to pre-drill both pieces.