Stella Athena Dresser/Bookcase Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket for a Stella Athena Dresser and Bookcase combo.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Public Domain
This is a bracket for the Stella Athena dresser and bookcase combo for those mounting the bookcase onto the dresser. For some reason the hardware for this was not included so I made this in order to keep my daughter from eventually knocking the bookcase off the dresser and possibly getting hurt.
Recommended PETG with 4+ walls and same for top/bottom, and I printed the bracket on it's side, but I'd recommend DYOR on print orientations for strength. Also, there are two black screws attached to the dresser at the top I used those as well as the short silver screw that came with the bag with the zip tie to prevent the tall furniture from tipping over. You'll need to pre-drill into the bookcase, and if you wish to use more than 2 of these you'll need to pre-drill both pieces.