Teradek Bolt 6 RX VESA Mount for Directors Monitor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to Mount Bolt 6 RX directly to Vesa Compatible Monitors for building a directors monitor or something comparable
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 1074
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple adapter to mount the Bolt 6 Reciever to a VESA compatible monitor. Including anti rotating pins & cutouts to not cover the Fanholes.
Needs a single 3/8" Screw. I used one from smallrig, available in their 1713 Screw Kit. If you use a shorter screw, you might need to adjust the spacer inside the hole.
Printed in PLA the mount is strong enough to hold the RX + a Vmount Battery.
Most smaller Screens with USB-C Power use 75 VESA, i added a 100 VESA version as well if you have a bigger monitor.
EDIT: I've added another version with all 4 Contact Points Made for fitting under the König & Meyer 19685 VESA Mount to use it with tripods.