Shelf that fits standard shelving rails with slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V1: Does not sit flush and requires a printer that can print the 90 degree overhang or supports. V2: Sits flush and…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
V1: Does not sit flush and requires a printer that can print the 90 degree overhang or supports.
V2: Sits flush and does not require supports.
V3: The Blender file is cleaned up, and the sketches are correctly defined.
V3_Optimized: Is more organized and follows best practices.
Print Settings
Printer:
Kingroon KP3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
V1 requires a little support if you want the locking mechanism to come out cleanly, as it tends to print it in mid-air without a triangle support.
I used PLA for this print.How I Designed This
Software:
I used Blender, along with the CAD Sketcher add-on.
Designing:
I took an extra shelf, measured it, and printed it as version 1 (V1). Then, I shortened it and created a better locking mechanism for easier 3D printing and less cleanup, resulting in version 2 (V2).
I use "https://imagy.app/resize-image-to-500kb" to resize the images to the required size for uploading them.
Category: Decor