Voron Stealthburner with LGX Lite - Door and mount for BTT EBB36
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the door for the SB with an LGX Lite extruder and BTT EBB36 v1.2 installed
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 3284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I recently switched to an LGX Lite extruder on my Voron. Since i use an EBB36 v1.2 i've remixed the door and mount for the EBB36 to have i fit nice and sit tightly on the SB. This way you can still use the door, have everything tucked away and safe from the drag chains. Left it semi-open on the back so the cables are protected but the board and stepper are still able to ventilate.
The door needs to be printed with support, mounts don't need supports. Printed mine in eSUN ABS+ Black with 110c for bed temp and 245c for hotend temp. You also need 5 hot inserts (3 for the cable chain, 2 for the EBB36 mount)