1 / 5
Ikea Skadis Bosch GluePen holder with drip pan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not pretty, but good enough to keep a GluePen stable at hand on an IKEA Skadis Rack without dripping hot glue...
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 86
- Wydruki
- 2
- Wyświetlenia
- 486
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (28)Powiązane
Not pretty, but good enough to keep a GluePen at hand on an Ikea Skadis rack without dripping hot glue.
You should print the small mount wedge standing vertical on the print plate with some supports (not much required for this little thing) for increased stability.
If the wedge doesn't fit tight enough in the back, a small drop of glue should fix it easily.