MK3S Hotend MOD for Prusa MINI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapted MK3S hotend pieces for the Prusa MINI so that you can use the MK3's hotend (E3D V6) for the Prusa MINI.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 3934
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Adapted MK3S hotend pieces for the Prusa MINI so that you can use the MK3's hotend (E3D V6) for the Prusa MINI.
I used the original Prusa MK3S files as found on:
https://www.prusa3d.com/downloads/others/MK3toMK3s_upgrade_stl.zip
Print instructions
I am a n00b, so please be gentle, this is my first upload.
Infill: 20%
Layer: 0.20mm
Fill Pattern: Grid
Material: Prusament PETG
No supports required
I have included 2 files for the "fs-cover":
If you are using Genuine Prusa parts, then use "fs cover - v4 - prusa thread".
If you are using a DIY kit that uses a different size thread, i have included "fs cover - v4 - custom thread"
I did not include the fan-shroud as it did not require any changes. It is the same fan-shroud used for the MK3S, which can be downloaded via Prusa's website and needs to be printed in ABS/ASA
No GCODE changes are required once you switch to this hotend setup. I am using the default "Prusa MINI" settings from PrusaSlicer with no issues.
Warning.... I would highly recommend going through the printers setup and first layer calibrations since you are messing with the MINDA