MK3S Hotend MOD for Prusa MINI
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapted MK3S hotend pieces for the Prusa MINI so that you can use the MK3's hotend (E3D V6) for the Prusa MINI.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 140
- Makes
- 1
- Views
- 3,934
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v3.0
Adapted MK3S hotend pieces for the Prusa MINI so that you can use the MK3's hotend (E3D V6) for the Prusa MINI.
I used the original Prusa MK3S files as found on:
https://www.prusa3d.com/downloads/others/MK3toMK3s_upgrade_stl.zip
Print instructions
I am a n00b, so please be gentle, this is my first upload.
Infill: 20%
Layer: 0.20mm
Fill Pattern: Grid
Material: Prusament PETG
No supports required
I have included 2 files for the "fs-cover":
If you are using Genuine Prusa parts, then use "fs cover - v4 - prusa thread".
If you are using a DIY kit that uses a different size thread, i have included "fs cover - v4 - custom thread"
I did not include the fan-shroud as it did not require any changes. It is the same fan-shroud used for the MK3S, which can be downloaded via Prusa's website and needs to be printed in ABS/ASA
No GCODE changes are required once you switch to this hotend setup. I am using the default "Prusa MINI" settings from PrusaSlicer with no issues.
Warning.... I would highly recommend going through the printers setup and first layer calibrations since you are messing with the MINDA