Heat Set Insert Press conversion Kit for Paulimot Drill Strand, with LED worklight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converting a drill stand into an heat set press for easily melting threaded inserts for screws into your parts.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 166
- Wydruki
- 5
- Wyświetlenia
- 2414
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heat Set Insert Press
With this conversion kit, the Paulimot drill stand can very easily be converted into a melting helper for thread inserts. Never again crooked threads or missing hands. ;)
The print can actually be made in all materials. The holder for the LED ring should rather be printed in a more temperature resistant material, because of the possible heat development. Almost all parts do not need supports (only the mounting block for the LED ring needs smaller supports).
For the assembly of the table you need:
- 4x - M4 thread insert
- 4x - M4*16mm
- 4x - M4 washer
If you want to mount the LED ring or the Key holder, you also need a M6*10mm or M6*12mm screw.
I have used the following parts:
- Drill stand
https://www.paulimot.de/Bohrstaender-mit-Arbeitstisch-43-mm
- Soldering iron
https://amzn.to/3Le78aj *
- Soldering Tips
https://amzn.to/3JwM1Pq *
- Threaded inserts
https://amzn.to/41ZSLfH *
- Switch
https://amzn.to/3mGOhKS *
- LED Ring 50mm
https://www.ebay.de/itm/274098656178?var=574196945905
For safety's sake, I mention that the assembly and use is of course at your own risk. Have fun with it!
* = Amazon Affiliate Links