AEG / Ridgid & Makita Batteries Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makita Version I've made a Makita compatible plate. It uses mojo_replica's battery terminal connector AEG Version I…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 752
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Makita Version
I've made a Makita compatible plate. It uses mojo_replica's battery terminal connector
AEG Version
I discovered that AEG is the same as the Ridgid brand in the US. Anyway, this is simple enough to print, doesn't use any supports and use whatever I had laying around: fuse connectors :)
This is a work in progress. I want to be able to put a LED spotlight on my AEG batteries.
I have not settled on what I will use as a spotlight so I'm releasing the connector. It still not perfect but it work great for now.
~~I'm using PCB fuse holder as connectors.~~
V2 is available and uses two pieces of brass (60x5mm @ 0.5 or 0.8mm)
Informations
There is multiple versions:
- 0, 1 or 3 straps for the base plate
- Two sizes of covers
- Two covers, one for housing a USB DC/DC convertor and a plain one.
- Some versions allows mounting a LED spot from AliExpress: LED Spot Light (Others should be fine) with a switch
- A Makita compatible base plate (Using mojo_replica's battery terminal connector or buy one directly: Makita Terminal Connector
This was designed using OnShape: AEG Battery Connector
Print Settings
Supports:
No
Connectors
Fuse holders used as connectors. You can find them on eBay. You can also use the V2 of the insert which uses two pieces of brass (60x5mm @ 0.5 or 0.8mm)

Category: Parts
