Prusa Mini - Simple 80mm Spool Holder with PTFE slider (remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgraded version of Flowalistik's 80mm spool holder. Uses 4mm OD PTFE tubes for slides to reduce spinning friction.
- Ocena
- 4,818 / 5
- Polubienia
- 22
- Pobrania
- 120
- Wydruki
- 14
- Wyświetlenia
- 801
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Re-Introducing the Flowalistik 80mm Spool Holder for the Prusa Mini with a twist! Say goodbye to messy dust created by cardboard spools spinning on the holder. I've taken inspiration from the Voron 0 spool holder and added a PTFE tube to reduce friction and create a cleaner, smoother experience. I also touched up the mesh of the model as there were some things that were just slightly off that needed readjusting.
To assemble this model, you will need a PTFE tube with an outer diameter of 4mm. Cut two pieces, one measuring 86mm long and the other 93mm. Simply pop the PTFE tube pieces into place.
This design is printed with PLA and with 4 perimeter walls for increased rigidity, and light supports. The Prusa Mini can handle the bridging with ease. A photo of the support painting in PrusaSlicer is included in the upload. Enjoy a dust-free, effortless spool holder experience!