Extrusion Clip for Articulating Pi Camera Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
**Had to edit this (Aug. 9) earlier version would hit the linear bearings if you placed the clip on the Y axis…
- Ocena
- 4,818 / 5
- Polubienia
- 110
- Pobrania
- 651
- Wydruki
- 14
- Wyświetlenia
- 3761
- Oceny
- 22
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
**Had to edit this (Aug. 9) earlier version would hit the linear bearings if you placed the clip on the Y axis extrusion.
A simple double remix mash-up that combines the extrusion clip of one design with the articulating arm of another.
I really liked the idea of simply clipping my Pi camera arm to the extrusion of my Prusa Mini (like in this design https://www.prusaprinters.org/prints/25205-flexi-arm-camera-mount/comments) but liked the articulating in this design https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m/comments so this is an extra little accessory that clips to the extrusion of your printer (Prusa Mini, but works on MK3 or 2 too I think) and fits with the articulating arm pieces linked above.
Print instructions
0.2mm in either PLA or PETG, needs to flex so can be up to full infill with PETG or 3 perimeters and 15% infill with PLA. I suggest laying on its side and using supports.