Extrusion Clip for Articulating Pi Camera Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
**Had to edit this (Aug. 9) earlier version would hit the linear bearings if you placed the clip on the Y axis…
- Rating
- 4.818 / 5
- Likes
- 110
- Downloads
- 651
- Makes
- 14
- Views
- 3,765
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
**Had to edit this (Aug. 9) earlier version would hit the linear bearings if you placed the clip on the Y axis extrusion.
A simple double remix mash-up that combines the extrusion clip of one design with the articulating arm of another.
I really liked the idea of simply clipping my Pi camera arm to the extrusion of my Prusa Mini (like in this design https://www.prusaprinters.org/prints/25205-flexi-arm-camera-mount/comments) but liked the articulating in this design https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m/comments so this is an extra little accessory that clips to the extrusion of your printer (Prusa Mini, but works on MK3 or 2 too I think) and fits with the articulating arm pieces linked above.
Print instructions
0.2mm in either PLA or PETG, needs to flex so can be up to full infill with PETG or 3 perimeters and 15% infill with PLA. I suggest laying on its side and using supports.